Basics of Building a Vinyl Fence

Fences can provide your family with security and privacy. In addition, they can also be strong design elements to define a home’s exterior appearance. But fences can be difficult to build and maintain. Wood fences look great but are difficult to maintain. Some untreated lumber like cedar could be left as is to turn streaky and silver-gray. This can cause homeowners to dislike the look. PVC Fencing Jeffrey’s bay Paint fences are neat and trim, but they become harder to paint as they age.

Vinyl fences are the answer. Vinyl fences can be attractive, durable, and low-maintenance. Vinyl fences cannot be painted or stained because they are infused with the color of vinyl. They manage to keep their color from season to season, year to year.

Basics of Building Vinyl Fence

Vinyl fences require an interlocking system. Make sure you have all necessary components for the complete kit before you buy. Otherwise, you will not be able to build the fence as vinyl fences do not allow for improvisation.

Vinyl picket fences

PVC Fencing Port Elizabeth Vinyl picket fences are made with anchor pipes that are driven into the ground using a sledgehammer. Hollow posts slide over anchor pipes like sleeves. A section can be made from two anchor pipes: one rail at its bottom and one at its top. Multiple pickets run through each rail.

Vinyl Privacy Fences

Taller, six-foot vinyl privacy fences’ posts must be anchored into the ground with concrete, like conventional four-by-four fence posts. These posts are not designed to slide over an existing anchor pipe. They are set directly into concrete. A fence panel can be pre-built, which means it is one piece and not multiple pieces that need to be put together.

Codes and Regulations

Before building your fence, you may need to apply for a permit . A permit must be closed if this is the case. All work must adhere to local building codes. Check out legal issues such permits and zoning. Local zoning and setback regulations can affect fence construction.

When to Build Your Vinyl Fence

It will be difficult to dig the holes for privacy fences or drive the anchor pipes if the ground has frozen. Be patient and wait until the ground thaws before you start building.

Fence-Building Safety

Call your Utility Locator when you dig on your land to locate any underground services, such as gas, water and electrical lines. PVC Fencing East London These services will have a color-coded spray coat that eventually wears away.

What You Will Need

Equipment / Tool

  • Shovel or post-hole digger
  • Twine and wood stakes
  • Bubble level
  • Tape measure
  • Sledgehammer
  • Cordless drill
  • Circular saw


  • Vinyl picket, privacy fence set
  • Quick-set concrete
  • Filler gravel

Leave a Reply

Your email address will not be published. Required fields are marked *

Back To Top